My Laundry Question
my washer doesnt stop running water unless you turn the water spikett off even if the washer is off i dont know if it can be fixed or do i need new washer
Share a Little Background Info
its a ESTATE made by WHIRLPOOL PT#W10200896 I dont know what happened it just started doing this welll acually my brother in law took hosses off cleaned screans put hosses back on and this is what its doing now
Lessons Learned
- i took hoses back off tryed only running cold water side didnt fix tryed only using hot water side didnt fix it i dont know what else to try
Mary Marlowe Leverette, Laundry Guide, says:
It could be a bad water level pressure valve in your washer or a low pressure leak because of a silt buildup in the water valve filter screen. It could be that your brother in law did not get the filters completely clean.
Turn your water off. Disconnect the water hoses. Look for silt inside the water valve opening. If present, clean it out and rehook water hoses. If no silt is present, replace your water valve.
You can find operating and repair manuals here.
Good luck!
Be a part of the Laundry Community
